Hedberg Landscape & Masonry Supplies is Minnesota's largest wholesale and retail supplier of landscape hardgoods, masonry products, water garden supplies and custom stone fabrication.

Masonry Product Calculator

Converting Flats & Corners For Manufactured Stone and Thin Veneers:

Linear Feet of Corners
Total SQ. FT.
You will need approximately:

square feet of flats.

* We recommend rounding up on all approximations, to ensure you have enough material.

Natural Stone 4" Veneer Mortar Coverage:

SQ. FT.
I am using
You will need approximately:

70# / 80# Bags (70# bags for Type N and 80# bags for Premix Type S)

* We recommend rounding up on all approximations, to ensure you have enough material.

* When using non premixed mortar, like Type N, M or S masonry cement, approximately 18 shovels or 200 lbs of fine masonry sand will be needed.

Natural Thin Veneer or Manufactured Stone Mortar Coverage:

SQ. FT.
I am using
You will need approximately:

70# / 80# Bags (70# bags for Type N and 80# bags for Premix Type S)

* We recommend rounding up on all approximations, to ensure you have enough material.

* When using non premixed mortar, like Type N, M or S masonry cement, approximately 18 shovels or 200 lbs of fine masonry sand will be needed.

Brick Mortar Coverage:

Number of brick per bag of Premix Type S:
Modular: 40
Queen/Oversized: 35
Builders Special: 35

Number of brick per bag of Type N:
Modular: 125
Queen/Oversized: 90
Builders Special: 90

Brick information:
Modular: 7 5/8" x 3 5/8" x 2 1/4" - 7 pcs./SF
Queen/Oversized: 7 5/8" x 2 3/4" x 2 3/4" - 5.75 pcs./SF
Builders Special: 8 5/8" x 3 1/8" x 2 3/4" - 7 pcs./SF
(Wall ties: 1 per 16 brick)

* When using non premixed mortar, like Type N, M or S masonry cement, approximately 18 shovels or 200 lbs of fine masonry sand will be needed.

Block Mortar Coverage:

Number of block per bag of Premix Type S:
10-12

Number of block per bag of Type N:
20-30

* When using non premixed mortar, like Type N, M or S masonry cement, approximately 18 shovels or 200 lbs of fine masonry sand will be needed.

Mortar Color:

Bags of Mortar
I am using
You will need approximately:

Bags of Mortar Color

* We recommend rounding up on all approximations, to ensure you have enough material.

* When using non premixed mortar, like Type N, M or S masonry cement, approximately 18 shovels or 200 lbs of fine masonry sand will be needed.

Paper & Lath:

Each roll of Double D paper contains 162 square feet (it is already doubled). When laying up the paper, start at the bottom and work the way up the wall. This way, the pieces above overlap the pieces below to allow for good drainage. If ordering paper by the pallet, they contain 144 rolls.

Each piece of lath measures 2'4" x 8' for a total of approximately 18 square feet. However, after overlapping the pieces 2" on vertical and 4" on horizontal - the yield per piece will be 16 square feet per piece. When using lath, keep in mind that is should be laid horizontally (8' running left to right). The lath should feel rough running up and smooth going down. Also, remember that if the wall has outside or inside corners that they need to be wrapped or corner aid needs to be used (If corners are butted up against each other rather than wrapped, they will crack the first time it freezes).

If ordering lath, it can be ordered 3 different ways: by the piece, bundle or pallet. A bundle has 10 pieces and a pallet has 25 bundles if using self-furring or 50 bundles if using flat.

* We recommend rounding up on all approximations, to ensure you have enough material.

* When using non premixed mortar, like Type N, M or S masonry cement, approximately 18 shovels or 200 lbs of fine masonry sand will be needed.