Hedberg Landscape & Masonry Supplies is Minnesota's largest wholesale and retail supplier of landscape hardgoods, masonry products, water garden supplies and custom stone fabrication.

Stucco Product Calculator

Stucco Scratch Coat:

SQ. FT.

• For small patches it is all right to use "sand mix" for base coat.

Larger jobs use:
bags of Portland Type I &
bags Masons Type N.
You will need approximately: shovels of stucco sand (coarse** sand).
You will need approximately: gallons of TK-225 bonding add mix.
You will need approximately: lbs. of 1/2" chopped fiberglass strands.

* We recommend rounding up on all approximations, to ensure you have enough material.

** If using synthetic stucco, use fine sand.

Stucco Brown Coat:

SQ. FT.

• For small patches it is all right to use "sand mix" for base coat.

Larger jobs use:
bags of Portland Type I &
bags Masons Type N.
You will need approximately: (#2)shovels of stucco sand
(coarse** sand).
You will need approximately: gallons of TK-225 bonding add mix.
You will need approximately: lbs. of 1/2" chopped fiberglass strands.

For best results, let brown coat sit 4-8 weeks before finishing.
Brown coat requires a minimum of 1 week cure time.

* We recommend rounding up on all approximations, to ensure you have enough material.

** If using synthetic stucco, use fine sand.

Stucco Finish Coat:

SQ. FT.
You will need approximately: bags of white Portland Type I.
You will need approximately: (100 lb.) bags silica sand
(4030 most common).
You will need approximately: gallons finish lime.
You will need approximately: gallons TK-225 bonding add mix.

* We recommend rounding up on all approximations, to ensure you have enough material.